Melbourne Tool Company Low Angle Block Plane Blades

Melbourne Tool Company Low Angle Block Plane Blades

SKU: MTC-49445
Price: $44.90
Adding to cart… The item has been added

MTC low angle planes are designed with the bevel of the blade facing upwards when installed in the plane. This low angle designoffers you the option tochoose between three different blade cutting angles to suit the material and work at hand. This is agreat advantage over traditional hand planes where the downward facing bevel is only present to relieve the cut. Takecontrol of your woodworking with MTClow angle planes and blades.

Please choose your preferred blades from the dropdown menu

Three blades for every challenge

The universal truth about woodworking is that wood is not a uniform material. Wood has grain. Long grain, short grain, quartergrain, end grain and cranky grain. Wood can also be hard or soft, stringy or dense. The point is that wood is not uniform so youneed tools that can deal with this. MTC low angle planes are the answer. MTC offers you three blades each with a differentcutting angle. These allow you to deal with the variations in wood and technique as required. A very low 25 degree cutting anglefor shaving end grain. A middle of the road 38 degree for smoothing. And a high angle of 50 degrees for figured and crankytimbers. Choose your preferred blade from the dropdown menu above.

The 25 degree blade

MTC low angle planes are supplied with a 25 degree blade standard. Together with the cast bed angle of the plane of 12 degrees, the effective cutting angle achieved is 37 degrees. Using the block plane, this bevel angle is perfect for shaving across end grain - the short ends of your wood where you are cutting laterally across the grain. End grain can be tough work without the right gear. Your MTC plane fitted with a sharp low 25 de gree blade is the perfect tool for this job.

The 38 degree blade

Available is a 38 degree blade, add the bed angle and you have an effective cutting angle of 50 degrees. This bevel angle is perfect for smoothing surfaces across or along the grain. Set in the block plane, this blade is perfect for planing fine edges, chamfering and trimming fitted parts.

The 50 degree blade

The 50 degree blade produces an effective cutting edge of 62 degrees. This very high cutting angle is ideal for smoothing fig ured ti mbers where tear out is a problem. Set in the block plane, this blade is great for working isolated patches of tear out smoot h or for shaping delicate decorative pieces made from figured wood

M2 High Speed Steel (HSS) blades

MTC has chosen M2 High Speed Steel (HSS) for the blades. M2 HSS has high abrasion resistance which means it will hold a sharp edge much longer than many other steels. This also means that it may take a little longer to bring up an edge. Don’t worry, you will be leaving your sharpening gear on the shelf for a lot longer too. MTC plane blades are also thicker than the average plane, this eliminates vibration is the cut, ensuring a smooth uniform finish.

Owner's Manual

MTC planes are delivered securely packaged in a foam lined cardboard box. Inside is a QR code you can scan to download your comprehensive Owner’s Manual. Visit the Melbourne Tool Company website for additional products, information downloads and video content.

Here are the specifications forthe MTC Low Angle Block PlaneBlades. To learn more, click or download view the Owner's Manual.

  • Brand-Melbourne Tool Company (MTC)
  • Country of origin-Designed in Melbourne Australia, manufactured in China
  • Warranty-Limited lifetime
  • Plane steel-M2 HSS
  • Plane blade dimensions-3.4 x 35x 110mm

Planeblade& kits SKU’s

  • 25 degrees MTC-49445
  • 38 degrees MTC-49452
  • 50 degrees MTC-49469
  • 38 & 50 degree blade kit MTC-49407-BLK-2
!